This document is provided "as is" with no warranties whatsoever, including any warranty of merchantability, non-in-
fringement, fitness for any particular purpose, or any warranty otherwise arising out of any proposal, specification, or
sample.
OmniVision Technologies, Inc. disclaims all liability, including liability for infringement of any proprietary
rights, relating to the use of information in this document. No license, expressed or implied, by estoppel
or otherwise, to any intellectual property rights is granted herein.
* Third-party brands, names, and trademarks are the property of their respective owners.
Note:
The information contained in this document is considered proprietary to OmniVision Technologies, Inc. This
information may be distributed only to individuals or organizations authorized by OmniVision Technologies, Inc. to
receive said information. Individuals and/or organizations are not allowed to re-distribute said information
APPLICATION NOTE
O
mni ision
®
OV7670/OV7171 EAA Prototyping Module
Quick Start Guide
Last Modified: 22 June 2006
Document Version: 1.1
Revision Number Date Revision
1.0 10/14/05 Initial Release
1.1 06/22/06 Changed Revision numbers listed on page 6.