3 series
Upper Arm
Blood
Pressure
Monitor
BP7100
Quick Start Guide
3787114-6A
®
1
Install batteries
1
Push down the hook of
the battery cover and pull
downward.
Battery cover
2
Insert 4 “AA” alkaline
batteries.
3
Close the battery cover.
2
Apply the arm cu
1
Plug the arm cuff into the
monitor.
2
Apply the arm cuff onto
your left upper arm.
The bottom edge of the arm cuff should
be 0.5 inch above the inside elbow.
0.5 inch
Bottom edge
3
Wrap the cuff securely.
Make sure that air tube is on the inside
of your arm.
For details, refer to the instruction manual.