A--26
Micro Programmable Controller
CPM1A
J GENERAL SPECIFICATIONS
Input type DC input
CPU type 10-point I/O 20-point I/O 30-point I/O 40-point I/O
Power supply
AC power supply 100 to 240 VAC, 50/60 Hz
quency
DC power supply 24 VDC
Operating
AC power supply 85 to 264 VAC
voltage range
DC power supply 20.4 to 26.4 VDC
Power
AC power supply 30 VA max. 60 VA max.
consumption
DC power supply 6Wmax. 20 W max.
Inrush current 30 A max. 60 A max.
External power
supply (AC only)
Power supply
voltage
24 VDC
Power supply
output capacity
200 mA 300 mA
Insulation resistance 20 MΩ min. at 500 VDC between the AC terminals and the protective earth terminal.
Dielectric strength 2,300 VAC at 50/60 Hz for one minute with a leakage current of 10 mA max. between all the
external AC terminals and the protective earth terminal.
Noise resistance Conforms to IEC61000-4-4, 2 kV (power lines)
1500 Vp-p, pulse width 0.1 to 1 µs, rise time: 1 ns (via noise simulation)
Vibration resistance 10 to 57 Hz with an amplitude of 0.075 mm, and 57 to 150 Hz with an acceleration of 1.5 G in
the X, Y, and Z directions for 10 sweeps of minutes each.
Shock resistance 147 m/s
2
in the X, Y and Z directions 3 times each.
Ambient
Operating 0°Cto55°C(32°F to 131°F)
temperature
Storage -- 2 0 °Cto75°C(--4°F to 167°F)
Ambient
humidity
Operating 10% to 90% RH no condensation
Ambient
environment
Operating With no corrosive gas
Terminal screw size M3
Power supply holding time 10 ms min. for AC models, and 2 ms min. for DC models
CPU Weight
AC models 400 g max. 500 g max.. 600 g max.. 700 g max.
DC models 300 g max. 400 g max. 500 g max. 600 g max.
Expansion Weight Units with 20 I/O points:
Units with 8 output points:
Units with 8 input points:
MAD01 Analog I/O unit:
MAD11 Analog I/O unit:
Temperature sensor units:
CompoBus/S I/O link unit:
DeviceNet I/O link unit:
Profibus-DP slave unit:
300 g max.
250 g max.
200 g max.
150 g max.
250 g max.
250 g max.
200 g max.
200 g max.
125 g