Omron E3C-LDA Series User Manual

14 Oil-resistant, Robust, Compact Photoelectric Sensor E3ZM-C
When disposing of the Sensor, treat it as industrial waste.
Mounting Diagram
Oil Resistance
• The Sensor has passed oil resistance testing for the oils listed in the
following table. Use this table as a
guide when considering
lubric
ants and cutting oils.
Note: 1. The Sensor was immersed in the above oils for 240 h at 55°C and
then passed an insulation resistance test at 100 M
Ω.
2. Use the kinetic viscosities and pHs in the above table as a guide
when using the Sensor in environments containing oils not listed in
the table. Additives in the oil may also affect performance. Always
test applicability in advance.
Test oil type Product name
Kinetic
viscosity at
40
°C (mm
2
/s)
pH
(dilution
rate)
Lubricants Velocity Oil No. 3 2.02 ---
Non-water-solu-
ble cutting oils
Yushiron Oil No.2 AC Less than 10 ---
Water-soluble
cutting oils
Yushiroken EC50T3
---
10.1 (
×30)
Yushiroken EC50T5 9.9 (
×30)
Yushiroken S46D 9.9 (
×50)
Yushiroken S50N 8.6 (
×50)
Yushiron Lubic HWC68 9.1 (
×30)
Yushiroken Synthetic
#770TG
9.9 (
×20)
Emulcut FA-900ST 9.7 (
×30)
Multicool CSF-9000 9.7 (
×20)
Sugicut CS-68JS-1 9.6 (
×20)
Toyocool 3A-666 9.6 (
×20)
Gryton 1700 9.1 (
×10)
Gryton 1700D 9.3 (
×3)
Mounting Bracket
(sold separately)
E39-L104
Use a mounting torque of
0.5 N·m max.

Omron E3C-LDA Series Specifications

General

Brand	Omron
Model	E3C-LDA Series
Category	Accessories
Language	English