A-64 Photoelectric Sensors
Super Manual Fiber Amplifier
E3X-NA
Adjuster type standard that is the culmina-
tion of true ease and simplicity
Features
Instinctive LED bar displays of light levels
The previous manual type used the stability and incident level
indicators to display the light level change, which was difficult
to understand at a glance. The E3X-NA uses the LED bars to
display the light level, ensuring the light level change at a
glance.
Same "Wire-saving" Connector as
E3X-DA-N
OMRON's original wiring-saving connector, which was inher-
ited from the digital fiber amplifier E3X-DA-N, allows connec-
tion of up to 16 units.
* The vertical movement
of the LED light level
and operation display
shows the light level
at a glance.
Operation indicator
Approx. 20% or lower
Approx. 10% or lower
Approx. -10% or higher
Approx. -20% or higher
Unstable level
E3X-NA Conventional model
Power supply
pin
Optical
commu-
nications
Master connector
Slave connector
Gang-mount up
to 16 Amplifiers
To Next Page
Need help?
General
