To Next Page

Solid-state Timer H3DE B-51

Timers

Solid-state Timer

H3DE

DIN Track Mounted, Standard 22.5-mm Width Timer Range

• A wide AC/DC power supply range (24 to 230 VAC/DC) reduces the number of timer models kept in stock. (except for H3DE-H)

• 12-VDC model available for a specific application. (H3DE-M2)

• Nameplate provided for easy timer identification and management.

• Terminal clamp left open when delivered.

• Finger protection terminal block to meet VDE0106/P100.

• Enables easy sequence checks through instantaneous outputs for a zero set value at any time range.

• Incorporates environment-friendly, cadmium-free contacts. (except for H3DE-H)

• High immunity to inverter noise.

• Approved by UL and CSA.

• Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Voltage, and EMC Directives.

■ Broad Line-up of H3DE Series

Contents

Solid-state Timer

H3DE-M/-S...................................................................................................................................... B-53

H3DE-F ........................................................................................................................................... B-63

H3DE-G .......................................................................................................................................... B-69

H3DE-H........................................................................................................................................... B-75

Common to ALL Timers

Accessories..................................................................................................................................... B-81

Precautions ..................................................................................................................................... B-82

H3DE

Standard Timer Twin Timer

H3DE-F

Star-delta Timer

H3DE-G

Power OFF-delay Timer

H3DE-H

H3DE-M/S H3DE-F H3DE-G H3DE-H

H3DE-M

H3DE-S