24
2. Inflation stops automatically and the measurement is started.
As the cuff deflates,
decreasing numbers appear on
the display.
The Heartbeat Symbol ( )
flashes at every heartbeat.
3. When the measurement is complete, the arm cuff
completely deflates. Your blood pressure and pulse
rate are displayed.
4. Press the START/STOP button to turn the
monitor off.
NOTE: The monitor will automatically turn
off after five minutes.
When the measurement is complete, the Heartbeat Symbol flashes on
the display with your blood pressure and pulse rate if the reading is
above 135 for the Systolic Blood Pressure value and/or 85 for the
Diastolic Blood Pressure value.
TAKING A MEASUREMENT
START
STOP
262640 HEM-711 EN_SP_r2.qxp 1/15/07 11:33 AM Page 24
To Next Page
Loading...
Need help?
General
