9
3. Using the Unit
EN
4. Remove the arm cuff.
5. Press the I/O button to turn off the monitor.
The monitor automatically stores the measurement in its memory.
It will automatically turn off after five minutes.
Important:
• If your systolic or diastolic pressure is outside the standard range, the
heartbeat symbol will blink when the measurement result is displayed.
Recent research suggests that the following values can be used as a
guide to high blood pressure for measurements taken at home.
This criteria is for home blood pressure measurement.
For professional office blood pressure measurement criteria, please refer to Chapter 7.
Systolic Blood Pressure Above 135 mmHg
Diastolic Blood Pressure Above 85 mmHg
HEM-4030-E_A_M_all.book 9 ページ ２０１１年１１月１８日 金曜日 午後４時５０分
To Next Page
Loading...
Need help?
General
