TABLE
OF
CONTENTS
TITLE PAGE
Introduction 1
Safety Precautions 2
Specifications
4
Description.
9
Installation 13
Operation 22
General
Maintenance 27
Parts
Catalog 35
The need for an international standard of measurement has been increased by
today's improved communication and transportation between countries.
This has prompted formation of modernized metrics known as the International
System of Units, officially abbreviated SI.
ONAN products appear on the world market, therefore both metric and the present
American system of units (CU) will be found in this manual.
To assist in familiarization, refer to the following terms.
TERM METRIC ENGLISH
Length ' millimetre (mm) Inch (in)
Pressure kilopascals pounds per square
(kPa) inch (PSI)
Mass (Weight) kilogram (kg) pound (Ib)
Volume (Liquid) litre gallon (gal)
Power kilowatt horsepower (HP)
Frequency hertz (Hz) cycles per second
(CPS)
Energy Joules (J) BTU
Battery Capacity Coulomb (C) Ampere Hour (AH)
Revolutions per Minute
r/min
rpm
Temperature Celsius (
0
C) Fahrenheit (
0
F)
The customary unit of Brake Horsepower (BHP) becomes kilowatts (kW) when
converted to SI metric units. This kW rating should not be confused with the kW
rating of the generator which will always be lower due to losses inherent with any
electrical induction device.
WARNING
TO AVOID POSSIBLE PERSONAL INJURY OR
EQUIPMENT DAMAGE, A QUALIFIED ELECTRI-
CIAN OR AN AUTHORIZED SERVICE
REPRESENTATIVE MUST PERFORM IN-
STALLATION AND ALL SERVICE.
To Next Page
Loading...
Need help?
General
