Firmware Update Onkyo TX-NR656, TX-
NR757, TX-RZ610, TX-RZ710, TX-RZ810 &
HT-R695 (HT-S7800)
(1-29-2018)
We are pleased to offer this firmware update for the best possible
performance of your Onkyo AV Receiver.
This update MUST be installed via USB.
TX-NR656, TX-NR757, TX-RZ610, TX-RZ710, TX-RZ810 & HT-R695
(Current Version 2109-4040-7080-0008)
The 1/29/2018 update will address the following, and includes
previous updates:
1. Adds support for external audio inputs for "FlareConnect".
*For detail about external audio inputs by model, please refer to:
http://www.onkyo.com/flareconnect/
2. Minor bug fixes and improvements stability.
Previous Updates (latest firmware includes all previous)
The 12-18-2017 update will address the following:
1. Adds support for pass-through function of Dolby Vision signal.
*Set the HDMI OUT to “MAIN” to get the Dolby Vision pass-through
(EXCEPT TX-NR555). Dolby Vision will not be available if the HDMI
OUT is set to “MAIN +SUB”.
The 11-2-2017 update will address the following:
1. Adds support for new multi-room audio playback function
"FlareConnect".
*All audio devices in group and "Onkyo Controller" App is required to
update to the latest version.
• Setup Guide: www.intl.onkyo.com/next_generation/setup.html
To Next Page
Need help?
General
