Do you have a question about the Onkyo HT-RC660 and is the answer not in the manual?
Receiver type | Surround |
---|---|
Frequency range | 5 - 100000 Hz |
Input sensitivity | 200 mV |
Pre-out connectivity | Yes |
Audio output channels | 7.2 channels |
Signal-to-Noise Ratio (SNR) | 106 dB |
Dynamic power per channel (3 Ohm) | 240 W |
Dynamic power per channel (4 Ohm) | 210 W |
Dynamic power per channel (8 Ohm) | 120 W |
Power output per channel (1KHz@6 Ohm) | 150 W |
Power output per channel (20-20KHz@8 Ohm) | - W |
HDMI in | 7 |
Audio (L/R) in | 6 |
Composite video in | 3 |
Digital audio coaxial in | 2 |
Component video (YPbPr/YCbCr) in | 1 |
Speakers connectivity type | - |
Bluetooth version | 2.1+EDR |
Bluetooth profiles | A2DP, AVRCP |
RDS features | PS, PTY, RT, TP |
AM band range | 522 - 1710 kHz |
FM band range | 87.5 - 108 MHz |
Supported radio bands | AM, FM |
Preset stations quantity | 40 |
Optical drive included | No |
Product color | Black |
Audio decoders | Dolby TrueHD, DTS-HD Master Audio |
Damping factor | 60 |
AC input voltage | 220-240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (standby) | 0.2 W |
Power consumption (typical) | 630 W |
Package weight | 13000 g |
Depth | 329 mm |
---|---|
Width | 435 mm |
Height | 173.5 mm |
Weight | 10500 g |