Onkyo LS-T10 User Manual

12
1.
(ON/STANDBY) button/INPUT button
Switches the power on/standby. Also, switches the input source.

To turn the power on: Press once when this unit is turned off.

To turn the standby: Press and hold for 3 seconds. The indicators go off.

To input the source: Press once to switch. Switches in the order of TV o USB o
Bluetooth each time the button is pressed.

Auto Power On function: The unit automatically turns on when audio signal
is output from the TV. To switch on/off this function, press and hold first
,
and then
for about 3 seconds. When this function is set to on, the
indicator flashes once. It flashes twice when this function is set to off.

Auto Standby function: The unit automatically enters the standby mode if the
status with no operation and sound continues 5 minutes. To switch on/off this function,
press and hold first
, and then for about 3 seconds. When this function is
set to on, the
indicator flashes once. It flashes twice when this function is set to off.
2. INPUT source indicators

Lights when the source is TV.

Lights when the source is USB.

Lights when the source is Bluetooth.
3.
VOLUME –/+ buttons
Allows to adjust the volume by 1 step in the 0 to 30 range.

Pressing the buttons together will mute audio. The status indicator on the
front of the main unit will flash. Press the VOLUME-/+ button again to cancel mute.
4. SOUND MODE button
Switches the sound mode of input sound as desired. The mode switches in the
order of MUSIC o NEWS o MOVIE o MUSIC o each time the button is pressed.
You can select the mode for each input source (TV, USB and Bluetooth).

MUSIC Mode: Gives concert hall-like sound effect.

NEWS Mode: Allows to comfortably listen news programs.

MOVIE Mode: Creates powerful 3D sound effect suitable for enjoying movies.

Onkyo LS-T10 Specifications

General

FM radio	-
Product color	Black
Recommended usage	Home theatre
Woofer diameter	120 mm
Number of woofer drivers	1
Full-range driver diameter	70 mm
Number of full-range drivers	6
Audio decoders	Dolby Digital
RMS rated power	- W
Audio output channels	- channels
Manual	Yes
Frequency range	150 - 20000 Hz
Soundbar dimensions (WxDxH)	700 x 350 x 105 mm
Bluetooth version	2.1+EDR
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Subwoofer frequency range	20 - 150 Hz
Cables included	Audio (3.5mm)
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	21 W
Package weight	12400 g

Weight and Dimensions

Soundbar weight	8700 g