Tuning into a Radio Station
Tuning into stations automatically
1. Press TUNER on the main unit several times to select either "AM" or
"FM".
2. Press TUNING MODE so that the "AUTO" indicator on the display lights.
3. Press TUNING to start automatic tuning.
Searching automatically stops when a station is found. When tuned
into a radio station, the " TUNED " indicator on the display lights.
When tuned into an FM radio station, the "FM STEREO" indicator
lights.
No sound is output while the " TUNED " indicator is off.
When the signal from an FM radio station is weak: Radio wave may be
weak depending on the building structure and environmental conditions. In
that case, manually tune into the radio station of your choice by referring to
the next section.
To Next Page
Need help?
General
