Onkyo TX-NR1010 User Manual

E n
AV RECEIVER
TX-NR1010
Instruction Manual
Contents
Safety Information and Introduction ............2
Table of Contents...........................................6
Connections .................................................13
Turning On & Basic Operations..................23
Advanced Operations ..................................54
Controlling Other Components...................88
Appendix.......................................................97
Internet Radio Guide
Remote Control Codes

Onkyo TX-NR1010 Specifications

General

Impedance	75 Ω
Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	2.0 channels
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.05 %
Dynamic power per channel (3 Ohm)	320 W
Dynamic power per channel (4 Ohm)	270 W
Dynamic power per channel (8 Ohm)	160 W
Power output per channel (1KHz@6 Ohm)	200 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	9
Line-in	Yes
Remote (IR) input	1
Composite video in	5
Digital audio optical in	3
Multichannel audio input type	RCA
Component video (YPbPr/YCbCr) in	2
Connectivity technology	Wired
12V trigger ports quantity	12
Audio formats supported	AAC, FLAC, LPCM, MP3, OGG, WAV, WMA
Wi-Fi	No
RDS features	PS, PTY, RT, TP
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	40
Display	LCD
Product color	Black
Audio decoders	Dolby Pro Logic, DTS Neo:6
Apple docking compatibility	Not supported
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.15 W
Power consumption (typical)	850 W
Package depth	594 mm
Package width	610 mm
Package height	337 mm
Card reader integrated	-

Weight and Dimensions

Depth	463.5 mm
Width	435 mm
Height	198.5 mm
Weight	23000 g