OPL-M40 Flash bulb, 40 w/s
OPL-SA02 Socket with umbrella mount
hank you for choosing the Opus OPL-M40 monolight.
The OPL-M40 is a simple to use 40 w/s self contained flash unit.
In order to ensure safe operation and to obtain peak performance from your Opus
OPL-M40 flash bulb, please take a few moments to familiarize yourself with this user
Please make sure that you fully understand the operating instructions and features
of your new monolight before using it.
Have some feedback? Kindly contact us at info@OpusProPhoto.com
* Turn off the power and unplug the power cord if the flash will not be used for a few days.
* For peak performance and longer life, the unit should be fired several times every month.
* Do not use the unit if it has been in contact with moisture or flammable vapour and / or
* Do not use the flash if it appears to be damaged.
* Never attempt to service the unit yourself. Severe shock and / or burns could result.
* Only certified technicians are authorized to service this unit.
* Before plugging in the unit, check that all the switches are in the “OFF” position.
The OPL-M40 can be screwed into any standard AC light socket. It can also be used with the
Opus OPL-SA02 light socket (see Available Accessories).
There are several ways to trigger the Opus OPL-M40 monolight
The sync socket is a standard
” jack and is used for connecting the OPL-M40 to a camera
with the sync cord. Please refer to your camera’s instruction manual for sync cord operation.
The OPL-M40 has a built-in photocell, enabling the unit to be triggered by another flash
The flash test fire button manually triggers the flash without using a camera. This is useful for
testing the flash and checking exposures.
Kit Contents
Control Panel Guide
Photo Cell, Sync Cord, Test Button
Due to our policy of constant product improvement, we reserve the right to change equip-
ment specifications and operating procedures without further notice.
To Previous Page
Loading...
Need help?
General