SET
CLOCK
START
TIME
HOW
LONG
HOW
OFTEN
AUTO
OFF
CLEAR
MANUAL
STATION
NEXT START TIME
EVERY
AM
PM
HOURS
DAYS
MINUTES
MANUAL
DIAL—Rotate the dial to customize your
watering schedule.
+/- BUTTONS—Use these buttons to adjust
time and program.
RAIN DELAY—While in AUTO press to
activate Rain Delay.
ARROW—Moves cursor around the screen
during programming.
STATION—Moves between Station 1
and Station 2.
MANUAL/CLEAR—Press to water manually or
to clear programming.
RESET—Press to reset back to factory settings.
AUTO—Timer waters according to your
customized schedule.
SET CLOCK—Set the time of day.
START TIME—Select what time you would
like to start watering.
HOW LONG—Determine how long to water
HOW OFTEN—Choose how often you will water
OFF—Turn off all watering.
INSTALLING THE BATTERIES
1. Remove the tray on the back of the timer by sliding or
pulling it out.
2. Insert two AAA (1.5V) alkaline batteries
(not included) and replace the tray.
NOTE: Firmly replace the battery tray to ensure water
resistance and increase battery life. You will know the
battery tray is fully inserted if it does not pull out easily.
Used up or dead batteries must be removed from the timer
and disposed of properly. Replace batteries when low
battery icon appears on display. Do not dispose of batteries
in fire. Batteries may explode or leak.
TIMER FEATURES
PROGRAMMING THE TIMER
SET CLOCK AND DAY
1. Turn dial to SET CLOCK.
2. Using the +/- buttons, set the time of day,
including AM and PM. Timer advances faster if
button is held down.
3. Press the ARROW button to set current day.
4. Press the +/- buttons to move between and select
the current day of the week. Press the ARROW
button to toggle back to the time of day.
5. Turn dial to save changes
WATERING SCHEDULES AND START TIMES
This timer features three customizable watering
schedules [A], [B], [C]. A watering schedule may
include start times for Station 1, Station 2, or both
Station 1 and Station 2. A watering start time is
the time of day the timer will begin to water all
programmed stations; one after another.
NOTE: Only watering schedule [A] is required. Advanced
Users may use watering schedules [B] and [C] for
additional watering.
1. Turn dial to START TIME.
2. Watering schedule [A] is automatically selected and
the time selector will be blinking.
NOTE: Timer will not function without at least watering
Printers are responsible
for meeting print
production requirements.
Any changes must be
approved by Orbit
®
.
Printed piece must meet
designated specifications
on this form.
© 2015 Orbit Inc.
This work is the property
of Orbit
®
, and cannot be
used, reproduced or
distributed in any way
without their express
permission.
Dieline
PMS
0000
Fold
PMS
0000
Product
Coverage
PMS
0000
Dims ./
Callout
PMS
0000
Orbit
®
1.801.299.5555
orbitonline.com
Glue
Folded Flat Additional Information
PRINTE RS ARE
REQUIRED TO MATCH
ALL SPEC IFIED
PMS COLORS.
K
DATE: 07/12/2016
DESIGNER: NK MARKETING:AY
SOFTWARE: Adobe Indesign CS6
ARTWORK №: 5654424 rD
L:
W:
H:
0.0" W:
H:3.0"
1.5"
12.0"
6.0"
schedule [A] selected.
3. Using the + / - buttons, set the time you want all
watering to begin, including AM and PM. Timer
advances faster if button is held down. A box is placed
around watering schedule [A] noting a start time has
been added.
NOTE: The timer will not function without at least
one start time entered.
4. Both Station 1 and Station 2 are automatically
selected (noted by boxes around them) when a start
time is added. Both Station 1 and Station 2 will water,
one after the other, beginning at your selected start
time. To remove a station from watering schedule [A]
press the STATION button to cycle through and select
Station 1 or Station 2. Press the - button to toggle the
station off (removing the box). Press the + button to
toggle the station on (adding the box).
NOTE: The timer will not function without at least one
station selected.
5. Advanced Users - To program watering schedules
[B] or [C] press the ARROW button to move through a
select {B] or [C]. Selected schedule will be blinking.
Repeat steps 3-5 to program additional watering
schedules. Use watering schedules [B] and [C] if you
need additional watering schedules.
6. Turn dial to save changes and move to the next step.
HOW LONG
1. Turn dial to HOW LONG.
2. Station 1 and the time selector will be blinking.
3. Use +/- buttons to add a 1 to 360 minute watering
duration. Timer advances faster if button is held
down. A box is placed around Station 1.
NOTE: A watering duration is required for Station 1 to water.
4. To select Station 2 press the STATION button. Station
2 and the time selector will be blinking.
NOTE: To move between stations press the STATION button.
Important, please read!
2 Outlet Advanced
HOSE FAUCET TIMER
SET
CLOCK
START
TIME
HOW
LONG
HOW
OFTEN
AUTO
OFF
SET
CLOCK
START
TIME
HOW
LONG
HOW
OFTEN
AUTO
OFF
PM
SET
CLOCK
START
TIME
HOW
LONG
HOW
OFTEN
AUTO
OFF
START TIME
AM
STATION
A
1 2
B C
HOSE TAP
CONNECTION
STATION 1
MANUAL/
CLEAR
FILTER
DIAL
RESET
LOW
BATTERY
INDICATOR
+/- BUTTONS
ARROW
STATION
STATION 2
NEXT START TIME
EVERY
AM
PM
HOURS
DAYS
MINUTES
MANUAL
STATION
To Next Page
Need help?
General
