Need help?Do you have a question about the oticon Acto and is the answer not in the manual?
General| Category | Hearing Aid |
|---|---|
| Manufacturer | Oticon |
| Model | Acto |
| Noise Reduction | Yes |
| Feedback Cancellation | Yes |
| Directional Microphones | Yes |
| Type | Behind-the-ear (BTE) |
| Styles | Mini BTE |
| Battery Type | 312 |
| Connectivity | Bluetooth, Wireless accessories |
| Programs | Multiple listening programs |
| Feedback Management | Yes |
Details on the receiver system for miniRITE and RITE instruments.
Overview of receiver types (S, M, P) and their specifications.
Guidelines for inserting the earpiece and placing the device behind the ear.
Overview of dome and micro mould options for standard/medium receivers.
Details on power moulds and micro moulds for power receivers.
Step-by-step guide for attaching Micro Moulds to the Receiver unit.
Procedure for detaching the micro mould from the receiver using the tool.
Using the measurement gauge to determine suitability for RITE Power fittings.
Step-by-step guide for attaching a Power Mould to the Power Receiver.
Step-by-step guide for safely removing the receiver unit from the power mould.
Instructions for fitting Corda² instruments with custom moulds using Genie.
Overview of programming interfaces and cables for connecting Acto instruments.
Procedure for connecting the miniRITE instrument using the Flex Connect.
Steps for connecting BTE and RITE instruments using the programming shoe.
Guide for connecting ITE and ITC instruments using the programming adapter.
Procedure for connecting CIC/MIC instruments using the Flex Connect.
Instructions for setting up nEARcom and detecting hearing instruments.
Process for identifying instruments and assigning them to the correct side in Genie.
Overview of Genie's horizontal organizer and vertical task pane.
Guide to starting the fitting process by selecting the instrument family.
Steps for selecting instrument styles and features based on client needs.
Introduction to the fitting step and fine-tuning of instrument settings.
Guide to adjusting gain controls, MPO, and frequency channels.
Explanation of Reserve Gain settings and Compression Ratios.
Guide to setting up the three-step Adaptation Manager for client acclimatisation.
Enabling/disabling and understanding features like Directionality and Noise Management.
Using the Feedback Manager to measure and adjust feedback limits.
Utilizing the Acoustics tool for vent size and dome type adjustments.
Steps for conducting in-situ audiometry for precise fittings with Genie.
Tools and information related to user operations and final instrument setup.
Guidelines for using Streamer for calls, answering, rejecting, and making calls.
Instructions for starting and stopping TV sound streaming via Streamer.
Instructions for handling incoming calls and making calls via the Phone Adapter.
Steps for connecting Streamer to PC, charging, and performing the upgrade.
To Next Page
