OWC ENVOY PRO EX Quick Start Guide

Envoy
®
Pro EX
Quick Start Guide
Package Contents
Envoy Pro EX
USB 3.0 Cable
Carrying Case
Getting Started
• To begin using the Envoy Pro EX, connect it to your
computer via the included USB 3.0 Cable (OS X 10.6 or later
required for Apple Mac, Windows® XP or later for PC).
• The Envoy Pro EX comes with the OWC Drive Guide
utility. This application is pre-installed to assist you with
formatting the drive. Double-click the Drive Guide icon and
follow the prompts. For more help, see the “Using the OWC
Drive Guide” PDF, located here:
www.owcdigital.com/format
• If your computer does not recognize the Envoy Pro EX
when it is connected, make sure both ends of the cable are
attached securely. You can also try plugging the cable into
a different USB port on your computer.
over

OWC ENVOY PRO EX Specifications

General

NVMe	Yes
Interface	PCI Express 3.0
Read speed	1250 MB/s
Write speed	- MB/s
SSD capacity	8000 GB
SSD form factor	M.2
Wi-Fi	-
USB version	3.2 Gen 2 (3.1 Gen 2)
USB connector	USB Type-C
Data transfer rate	10 Gbit/s
Thunderbolt version	3
Certification	FCC
Product color	Silver
Housing material	Aluminum
Mac operating systems supported	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Windows operating systems supported	Windows 10
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Sustainability certificates	RoHS

Weight and Dimensions

Depth	115 mm
Width	65 mm
Height	9 mm
Weight	148 g