PAC-12 Kit Contents
Part Quantity
Screws: 8/32 x 3/8” 8**
Screws: 8-32 x 5/16” 2
Screw: 8-32 x 1/4” 1
#8 internal tooth washers **
#8 solder lug ring terminals 6
Bolt: Aluminum, 1/4-20 x 1.5” 1
1/4” internal tooth washer 1
Nut: Aluminum hex, 1/4-20 1
Stainless wing nut, 1/4-20 1
BNC connector 1
BNC mounting plate 1
Stranded wire red and green 3”
#18AWG enamel wire for standard coils or **
Tinned copper wire for multi-band coil **
Ground coupling radial kit 1 1
Feed point insulator PVC tube 1
Feed point insulator end caps 2
Full size coil kit and **
2 Compact coil kits or **
Multi-band coil kit **
Aluminum Rods 12” 2
Aluminum hex coupling nut 1
72” telescoping antenna 1
Antenna whip adapter 1
Ground spike 1
Tools Needed
Soldering iron
Phillips screwdriver
Wire stripper
Wrenches, 7/16” and 1/2”
Terminal crimp tool
Pliers
Solder
PAC12_Manual
V3.0_20160712
To Next Page
Need help?
General
