To Next Page

REMOTE CAMERA CONTROLLER AW-RP120

Operating Instructions

Remote Camera Controller

 ModelNo.



AW‑RP120G

VQT4T93A(E)M1212HO0-FJ

ENGLISH



 HowtheOperatingInstructionsareconfigured

<Basics>:

  The<Basics>describestheprocedureforconnectionwiththerequiredequipmentandforinstallation.

Beforeinstallingthisunit,besuretotakethetimetoreadthrough<Basics>toensurethattheunitwill

beinstalledcorrectly.

<Operations and Settings> (thismanual):

  This<OperationsandSettings>describeshowtooperatetheunitandhowtoestablishitssettings.

Default Chapter1
- Operating Instructions1
- Table of Contents2
How to Turn on and off the Power of the Remote Cameras3
- How to Turn on the Power of the Remote Cameras3
- How to Turn off the Power of the Remote Cameras4
Making Image Adjustments for the Selected Remote Camera5
- Setting the Gain6
- Setting the Pedestal6
- Setting the White Balance6
- Setting the Black Balance7
- Selecting the Color Bars8
- Setting the Detail8
- Adjusting the Shutter Speed8
- Setting the Shooting Mode (SCENE 1 to SCENE 4)9
- Setting an ND Filter10
Operating the OSD Menu of a Remote Camera11
Operating Preset Memory (PMEM)12
- Registering Preset Memory (STORE)13
- Recalling Preset Memory (RECALL)13
- Deleting Preset Memory (DELETE)13
- Setting the Operation Items for When Preset Memory14
  - Is Recalled (PRESET SCOPE)14
- Setting the Speed at Which to Move to the Position Set in the Preset Memory (PRESET SPEED)14
Operating Preset Memory Groups (PMEM GROUP)16
- Setting the Operation Mode (SEPARATE/ALL)16
- Creating Preset Memory Groups16
- Recalling Preset Memory Groups17
Operating Tracing Memory (TMEM)18
- Registering Tracing Memory (STORE)18
- Recalling Tracing Memory (RECALL)19
- Deleting Tracing Memory (DELETE)20
- Restoring Tracing Memory (RESTORE)20
- Setting the Items to Recall When Recalling Tracing Memory21
Configuring the Remote Camera Operation Settings22
- Adjusting the Operation Speed of the Pan, Tilt, Zoom, and Focus22
- Setting the PAN/TILT Lever Inclination and Speed22
- Setting the Pan, Tilt, Zoom, and Focus Operation Directions23
- Setting the Minimum Lens Zoom Start Speed24
- Setting the Speed of the Pan and Tilt Operations24
  - For Telephoto Shooting24
- Setting the Movement Ranges (Limiter Function)25
  - Of a Remote Camera25
- Returning a Remote Cameras to Its Home Position25
- Controlling the Peripheral Devices Connected26
  - To a Remote Camera26
Configuring the Unit Operation Settings27
- Enabling or Disabling Operation with the ENABLE Buttons27
- Enabling or Disabling Operation of the ENABLE Buttons28
  - By Menu Operation28
- Enabling or Disabling Menu Operation28
- Switching the Focus Operation and Iris Operation29
- Setting the LCD Panel Backlight29
- Assigning Functions to the USER Buttons30
Setting Linking with a Switcher31
- Registering the Camera Numbers that will Correspond to the Image31
  - Inputs of the Switcher31
- Enabling or Disabling the Function for Linking with the Switcher31
Setting the Functions for When the Unit Is Linked32
With the Switcher32
- BUSCONT Function32
- FOCUS ASSIST Function33
- CAMERA SELECT View Function33
- TALLY IP Function34
- Operating the Switcher with the PAN/TILT Lever34
  - And ZOOM Button34
- CAM INF Function35
Memory Card Operations36
- Initializing a Memory Card (INIT)37
- Saving Data to a Memory Card (SAVE)37
- Loading Data from a Memory Card (LOAD)38
- Deleting the Files Saved to a Memory Card (DELETE)38
Tally Settings39
- Registering the Camera Numbers that will Correspond39
  - To the TALLY Inputs39
- Setting the Sending of Tally Information from the Unit39
  - To Remote Cameras39
Checking Alarm Information40
- Displaying Alarm Information40
Returning the Unit to the Factory Default State (INITIALIZE)41
- Returning the Unit to the Factory Default State42
Control Interface for External Devices43
Setup Software45
- Installing the Software45
- Configuring the Settings of the Personal Computer45
- Connecting the Personal Computer46
- Registering the Unit in Setup Software47
- Settings for Connecting with the Remote Cameras and Switcher48
- Setting User Authentication50
Operations of AW-HE251
Table of Setting Items (Dedicated Dials and Buttons)52
Table of Setting Items (Menus)53
Messages56
Index58

Brand	Panasonic
Model	AWRP120
Category	Remote Control
Language	English

Panasonic AWRP120 User Manual

Table of Contents

Questions and Answers:

Panasonic AWRP120 Specifications

Related product manuals