E
N
G
L
I
S
H
22
CQ-HX2083U
49
E
N
G
L
I
S
H
21
CQ-HX2083U
48
Front Panel Settings [COLOR]
Display Color Changing
Pattern (STORM)
This is used to select the pattern that
changes the colors of the display area.
Default: PATTERN 1
Setting range: PATTERN 1 to PATTERN 4
Base Color Selection
(LEVEL)
This is used to select the display colors
which are to be changed in line with the
variations in the music level.
Default: PURPLE
Display Color Customize
(CUSTOM)
This enables the display colors to be set
by adjusting the R (red), G (green) and B
(blue) levels.
Default: ALL 50
Setting range: 0 to 100
2 Submenu 3 Set1 Menu
In the case of remote control, as an alternative to
performing operations from the menu, the opera-
tions can be performed directly using the buttons
shown below.
The following transition will be made by each
[FACE] pressing.
When set to STORM
PATTERN 1 PATTERN 2
PATTERN 4 PATTERN 3
When set to LEVEL
PURPLE AQUA BLUE
YELLOW RED
BLUE GREEN
When set to CUSTOM
Current setting Complementary color
12 3
Press.
Press.
(Example: STORM) (Example: PATTERN 1)
Press.
Press.
For details on how to perform menu operations
using the remote control, refer to page 28.
Note:
≥ Press [MENU] or [DISP] (display) on the remote
control to return to the regular mode.
≥ Press /[RET] (RETURN) to return to the pre-
vious display.
: PATTERN 1
: PATTERN 2
: PATTERN 3
: PATTERN 4
: Red
: Green
: Blue
: Yellow
: Purple
: Aqua blue
: Up
: Down
Red Green
Blue