Panasonic KX-TGP600 Installation Guide

PANASONIC PHONE SYSTEM INSTALLATION GUIDE
Model numbers: KX-TGP600, KX-TPA60, KX-TPA65
REVIEW ITEMS INCLUDED WITH YOUR PHONE SYSTEM
Depending on the equipment ordered, you will have the following items included in your shipment:
It is important to note that the initial setup process and registration of your devices can take up to 1 hour. Please ensure that you have
completed the process to charge your handset (if applicable) prior to beginning the installation process.
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW ACN DIGITALTALK® EXPRESS PHONE SYSTEM!
Wireless Base Station
(KX-TGP600)
Ethernet Cable (1)
Desktop Phone
(KX-TPA65)
Screws & Washers for
Desktop Wall Mount (2/2)
Handset Phone
(KX-TPA60)
Handset
Batteries (2)
AC Adaptor for Desktop
Phone (1)
DC Output: 6.5 V
Handset
Belt Clip (1)
AC Adaptor for Base
Station (1)
DC Output: 6.5 V
Desktop
Handset Cord (1)
AC Adaptor for
Handset Charger (1)
DC Output: 5.5 V
Desktop
Handset (1)
Desktop
Stand (1)
Before you begin the installation process, please confirm you have the following:
1. An active Internet connection
2. All devices associated with your new phone system
3. ACN Installation Instructions email (Required for telephone number registration and conguration (see page 2))
Once confirmed you have the items noted above, please review then follow the instructions in sequence below, beginning with Step 1.
STOP
STEP 1 A – SETTING UP THE HANDSET(S) CHARGER / PREPARING THE HANDSET(S) FOR USE
1. Open the battery cover, insert the
batteries and close the cover.
2. Connect the AC adaptor to the charger.
3. Place handset in charger for at least
six (6) hours prior to registration/use.
Bottom of Handset charger
Handset
STEP 1 B – ASSEMBLING THE DESKTOP PHONE(S)
Bottom of Desktop Phone
Desktop Phone
Attach the AC adaptor, corded handset (and headset, where applicable) to the desktop phone.

Panasonic KX-TGP600 Specifications

General

Speakerphone	-
Voice codecs	G.711a, G.722, G.722.2, G.729A
Handset type	Wireless handset
Product type	IP Phone
Product color	Black
DECT connectable	Yes
Number of handles included	1 pc(s)
Number of DECT wireless handsets	8
Display diagonal	1.8 \
Frequency band	1.88 - 1.90 GHz
Lines quantity	- lines
Phonebook capacity	500 entries
Networking standards	IEEE 802.1Q, IEEE 802.3af
Ethernet LAN (RJ-45) ports	1
Standby time	200 h
Battery type	AAA
Battery capacity	630 mAh
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	25.5 mm
Width	47.8 mm
Height	153.2 mm
Weight	117 g