Key Features
•SmartphoneConnect:
You can use your smartphone or tablet as a sub monitor to respond to visitors and unlock electric locks no matter where you are in the
home. You can also monitor doorphone images when you want to check the door entrance. Maximum of 4 supported smartphones/tablets can be connected.
* The main monitor must be on the same home Wi-Fi network as a smartphone/tablet (with the dedicated app installed).
* It is also necessary to run the dedicated app in order to receive visitor's calls on a smartphone/tablet.
* Compatible mobile devices: iPhone 5 and later and iPad (iOS 7.0 or later) / Android
TM
smartphones and tablets (Android 4.0 or later)
* Some mobile devices may not be compatible.
* For the latest information about the app and compatible devices, visit the following website. http://panasonic.net/pcc/support/intercom/smartphone/
•E-mailNotication:
The main monitor can send e-mail with a time stamp and image of visitors to e-mail addresses registered in advance, enabling you to
check who has visited when you are outside the house (even when you are overseas).
When commercially available sensors (such as a re alarm, calling button, etc.) are connected to the main monitor, you can receive notications.
* To use this function, a main monitor with e-mail sender information registered must be connected to the internet.
* E-mail may not be able to be sent depending on the condition of the network.
•Wi-FiConnection:
In addition to smartphones/tablets, the main monitor can also wirelessly connect to the Wi-Fi router for easy connections without a cable.
You can congure Wi-Fi settings using a simplied method (called WPS).
•ElectricLockReleaseSupport:
The gate or door lock can be easily and quickly unlocked with either the main monitor or a mobile device such as a
smartphone/tablet, even from the second oor of the house.
•PictureRecordingFunction:
The Main Monitor records the images of up to 400 (50 visitors, 8 shots per visitor).
•Wide-AngleCamera:
Wide-angle lens covers approximately 170 degrees horizontally and 130 degrees vertically.
•VoiceChangeFunction:
This function makes woman’s voice (higher keys) sounds like a man’s (lower keys).
•NightVision:
Door Station is equipped with LED lights (illumination lamp). It enables the colour display of visitors at a distance of about 50 cm at night.
Wiring schematic diagram
Accessory Information Optional Accessories
VL-SVN511EX/FX
Video Intercom System
Door Station
(Doorphone)
CMOS 0.3 M pixels
VL-V555EX/FX
(Surface mount)
Door Station
(Doorphone)
CMOS 1.0 M pixels
VL-V554EX/FX
(Surface mount)
VL-V554UEX/FX
(Flash mount)
For the Door Station:
Mounting base × 1, Screw (4 x 12 mm) × 4,
Name plate × 2, Hex wrench × 1
Relay Box and Related Items:
Relay box × 1, Cable binder × 1
[Locally procured]
– Screws (for mounting base: × 2, for mounting bracket: × 2)
– Power cables (AC/DC cables), wires (for doorphone and other connections)
For the Main Monitor Station:
Mounting bracket × 1, Cable binder × 1,
Power supply unit (VL-PS240) × 1, Cable binder × 2
Power
supply
Power
supply
DOORPHONE 1* DOORPHONE 2*
MAIN MONITOR
POWER SUPPLY UNIT
24 V DC
NP
NP
NP
NP
NP
Electric lock
Electric lock
220-240 V AC
Connection device
for option input
(A contact)
12 V AC/DC
12 V AC/DC
NP NP
RELAY BOX
A
B
C
D
E
F
1
2
D1
D2
3
4
D3
D4
5
6
R1
R2
7
8
R3
IN1
9
10
IN2
IN3
11IN4
R1
1
R2 R3
S2
1
S1
S4
2
S3
2
Wire type and length
Wiring run
Wire type
*1
Diameter Length (Max.)
Main monitor – Doorphone
(including lobby station)
A
φ
0.65 mm 22 AWG 100 m
φ
1.0 mm 18 AWG 130 m
φ
0.5 mm CAT 5 50 m
Main monitor – Power supply unit
B
φ
0.65 mm 22 AWG 10 m
φ
1.0 mm 18 AWG 20 m
Power supply unit – AC power source
C
φ
1.2 mm -
φ
2.0 mm (17 AWG - 12 AWG)
No requirement
Main monitor – Relay box
D
φ
0.65 mm 22 AWG 100 m
φ
1.0 mm 18 AWG 130 m
Relay box –Electric lock
*2
E
φ
0.5 mm -
φ
1.2 mm (24 AWG - 17 AWG)
According to specication of connected device.
Main monitor – Connection device for option input (A contact)
*2
F
φ
0.5 mm -
φ
1.2 mm (24 AWG - 17 AWG)
According to specication of connected device.
*1 Type: Single-pair cable with outer sheath (jacket)
Conductor: Copper solid
• A certied power supply wiring has to be used with this equipment.
The relevant national installation and/or equipment regulations shall
be considered. A certied power supply wiring not lighter than ordinary
polyvinyl chloride exible wiring according to IEC 60227 shall be used.
*2 When using an electric lock or a connection device for option input
(A contact), select a device that meets the following guidelines:
• Electric lock connection terminal (S1/S2, S3/S4):
– N/O dry closure contact
– 12 V AC/DC, less than 1 A
•
Connection device for option input (A contact) terminal (IN1/IN2/IN3/IN4):
– Input method: No-voltage contact
– Open-circuit voltage between terminals: DC 7 V or less
– Detection denite time: 0.1 second or more
– Short-circuit between terminals: 5 mA or less
– Resistance value: make: 500 Ω or less make, break: 15 KΩ or more
*When you use an additional doorphone, the maximum number of the electric locks that can be connected
to the doorphone depends on the type of doorphone. Consult your dealer for further information.
*Flash mounting box (VL-MB554EX) is sold separately.
NP: Non-polarised
To Next Page
Need help?
General
