Panduit MP200 Firmware Update Instruction Manual

DWG# 1005977 rAA
1
Firmware Update Instruction Manual
This manual guides you through downloading the latest MP200 firmware from Panduit website and updating the
firmware of your MP200.
Important!
 Settings is erased due to the update.
 During the update, be sure to use the AC adapter to supply the power to the printer instead of using the lithium-ion
battery or alkaline batteries.
1. Preparation
Check if your MP200 needs firmware update
Follow the procedure below to check whether your MP200 needs firmware update or not.
The firmware update is not necessary if the version is the latest one.
How to check
1. While powered on, press .
Preference screen appears.
2. Select the [Version] menu to check the firmware version.
If the version is 1000,
the firmware is old and needs to be updated.
Check the OS version of your computer
Make sure your OS version is one of the following.
 Windows 7 (32bit/64bit)
 Windows 8 (32bit/64bit)
 Windows 8.1 (32bit/64bit)
 Windows 10 (32bit/64bit)
key

Panduit MP200 Specifications

General

Color	No
Printing colors	Black
Print technology	-
Maximum resolution	180 x 180 DPI
Wire wrap printing	Yes
Maximum printing width	25.4 mm
Ribbon width	24 mm
Ribbon length	7 m
Connectivity technology	Wired & Wireless
Display	LCD
Control type	Buttons
Keyboard layout	QWERTY
Battery type	Built-in battery

Weight and Dimensions

Depth	298 mm
Width	136 mm
Height	90 mm