INSTALLATION GUIDE OF DG-85 FOUR-ELEMENT
INTELLIGENT PIR INTRUSION DETECTOR
Lens
Walk-test LED
PIR
LED
Code switch
Sensitivity adjust
Figure 1.General View Figure 2.Inside View
2.Specifications
Top view
Side view
Connect terminals
Models:
Input Voltage 9-16VDC
Cyrrent Drain 30mA@ 12VDC
Detection Range 11.6m*11.6m
Alarm output NC.>100mA/28VDC
Anti white light resistance
>20000LUX
Installation height:2m-2.7m
Tamper switch NC.100mA/28VDC
DG-85
DG-85DMF
DG-85DMT
PIR Section:Lens Date
NO.of Curtain Beams (11+11+9)*2=62
Tripping Indication:
lndicator lights for about 10-30 seconds
Anti -EMI/RFI 10V/m 10MHz-1000MHz
Motion test 0.2m/s-3.5m/s(0.6ft-11ft)
Humidity 5%-95% RH
Accessories:
BR-1:Surface mounted swivel bracket,adjustable 30
down and 45 left/right.
Environmental:
Operating Temp: -10 C to 50 C(14 F to 122 F )
Storage Temp :-20 C to 60 C (-4 F to 40 F)
Physical
Size(H*W*D):176*85*69mm
3.Installation
3.1 General Guidelines
No direct facing cold
/hot source
No direct sun shine Keep away from high
pressure power
No facing metal wall Installation base
should be stable
1.Brief Introduction
DG-85 is a kind of PIR intrusion detector integrating the most
advanced security technology. It adopts 2 dual PIR sensors with
high accuracy, intelligent digi-tal chip, advanced ,<True Motion
Recognition & Anti-pests>of tware technology, which can help
it to make an accurate judgment of trueintruder or other interfer
-ence that can cause wrong alarm. And it is with function of auto
-matic memory of environmental change, which can avoid wro
-ng alarm a used by hot & cold air, opera-tion machine interfere
-nce. It can prevent effectively the interference cause by a 25 kg
past or 10 cats, insect, mouse, birds etc. Its super filter can be
used indoor and outdoor. This has clear various interference
that com-mon PIR detector can't overcome; and put an end to
wrong alarm and miss alarm .DG-85 has two different working
modes: bus mode and relay mode, can be used for all kinds of
control panels on the market.
This device is coherent to Europe parliament direct 1999/5/EC
necessary items and rules, and also coherent to the main spirits
of radio and telecom terminal equipments on March 9 . 1999.
The device also reaches the Canadian standard RSS-210. It can
be used indoor and outdoor, which can reach its maximum prote-
ction and avoidance of above interference.
th
3.2Anti-pests installation
Theupperpartofthe
detection area is non
anti-pests area
Never face the detector to
the place that pests can
climb up directly
20KgAnti-pests weight The installation height
of the detector is 2.2-2.4
meters can Anti-pests