1
°F / °C
Display
Page 12
Options
Page 14
Present Status
(Current seg. &
Board temp.)
Page 13
Alarm
Page 13
Cone-Fire
Page 6
Program
Review
Page 5
Cone #s
(Cone Table)
Page 8
Skip Segment
Page 11
Ramp-Hold
Page 9
Stop
Page 5
DTC 1000
Digital Temperature Controller
Complete Operation & Maintenance Instructions
See page 22 for instructions on upgrading your DTC
100, 600 or 800 series board to the DTC 1000.
The Keypad
The controller is easy to master once you understand that the keys have two functions:
1 Select an operation.
Press a key to start the operation shown in the top half of the key. Most operations begin by
pressing START from IdLE display. Some operations begin during firing.
2 Type Numbers.
After beginning an operation, press keys to enter numbers, such as time and temperature.
Delay
Page 13
To Next Page
Need help?
General
