Parker Airtek TWP500 - User Manual

1
Externally Heated & Blower Purge
Desiccant Dryers
User Manual
Models TWP/TWB200 – TWP/TWB9000

Parker Airtek TWP500 Specifications

General

Brand	Parker
Model	Airtek TWP500
Category	Dryer
Language	English

Summary

Safety and Precautions

Installation

Recommended Installation

General Operation

Wiring Diagram Standard Controller

Panel Layout Standard Controller

Start Up

Timing Configuration

Externally Heated Cycle

Blower Purge Cycle

Heatless Backup Cycle

Manual Stepping

Controller Display & Operation

Main Screen User Controls

Dewpoint Settings

Drain Settings

User Sensor Settings

Alarm Settings

Configuration for high/low setpoints for dewpoint, temperature, and pressure alarms.

Advance Settings

Historical Trend Display

Sensor Screen

I;O Screens

Service Screen

Alarm Indicator Display

Alarms

List of active alarms with descriptions for troubleshooting.

Alarm History

Active Alarms List Screen

Alarm Chart

Communications

VNC Server

Ethernet

Serial Modbus Port

Modbus Register Map

Shut Down

Maintenance

Daily

Troubleshooting

Dryer not operating; no lights on

Troubleshooting steps for when the dryer has no power or lights.

Power light on, other lights off, dryer does not operate

Steps for when power is on but dryer doesn't start.

Dryer not operating; lights on, dryer does not switch

Troubleshooting for when dryer lights are on but it doesn't switch states.

No heat in regenerating bed

Dryer cycles, no heat

Insufficient Heat

High Outlet Dewpoint or Moisture Downstream

Identifying reasons for high dewpoint or moisture in outlet air.

Excessive Air Loss On Regenerating Tower

Exhaust Valve On Drying or Repressurizing Tower Leaking

Excessive Pressure Drop

Unit Does Not Fully Pressurize

Back Pressure In Regenerating Tower

Inlet or Exhaust Valve Not Functioning

Blower not operating (TWB dryers only)

Technical Specifications

Externally Heated Dryer Technical Specs