To Next PageTo Next Page
Need help?Do you have a question about the Parkside PABSP 20-Li B2 and is the answer not in the manual?
General| Battery Voltage | 20 V |
|---|---|
| Battery Type | Li-Ion |
| Battery Capacity | 2.0 Ah |
| Chuck Capacity | 13 mm |
| Chuck Size | 13 mm |
| Speed Settings | 2 |
| No-load Speed | 0-400/0-1400 rpm |
| Drilling Capacity in Steel | 13 mm |
| Torque Settings | 25 + 1 drill setting |
Defines the product's purpose, including materials for drilling and limitations.
Lists all items included in the product package.
Details the components of the cordless drill and battery.
Provides specifications like voltage, speed, torque, and dimensions.
Covers work area, electrical, and personal safety precautions.
Precautions related to electrical hazards and equipment.
Guidelines for staying alert and safe while operating the tool.
Proper usage, maintenance, and care for the power tool.
Specific instructions for handling and maintaining battery packs.
Information regarding tool servicing and repair.
Specific safety advice for using drill bits and operations.
Guidance on minimizing exposure to vibration and noise.
Instructions on what to do in case of malfunctions or emergencies.
Potential hazards that remain even with proper use.
Safety measures for using the battery charger.
Lists necessary and recommended tools for operation.
Instructions on mounting and using the belt clip.
Step-by-step guide to inserting and removing the battery.
How to check the battery's charge status using LEDs.
Instructions for charging the battery pack safely.
Guide for securely fitting and removing drill bits and accessories.
Explanation of how to change gears for different tasks.
How to change the drill's rotation direction.
Adjusting the torque setting for screws and drilling.
How to operate the power tool's on/off switch.
How to adjust the tool's speed using the trigger.
Information about the built-in LED for illumination.
Procedure for initial testing before actual use.
Advice on torque settings for screws and small bits.
Specific settings for high-torque metal screw tasks.
Guidance for soft wood, including using a countersink.
Tips for drilling based on material and bit size.
Specific instructions for drilling into metal with cooling.
How to drill into wood using specific bit types.
General advice on maintaining the product's condition.
Tips for storing and maintaining battery packs.
Safe methods for transporting the tool.
