EasyManuals Logo
Home>Peavey>Amplifier>CS 1000X

Peavey CS 1000X User Manual

Peavey CS 1000X
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
A
WARNING!
For optimum performance and reliability DO NOT PRESENT THE AMPLIFIER WITH A SPEAKER LOAD OF LESS THAN 2 OHMS, OR A
COMBINATION OF SPEAKERS THAT TOGETHER ARE LESS THAN 2 OHMS!
Using one speaker, it must be rated at 2 ohms minimum.
Using two speakers, they must be rated each at 4 ohms minimum.
Using three speakers, they must be rated each at 8 ohms minimum.
The world-famous
C!F
1000 power amplifier has been changed to the new, extended-performance
CS@
1000X. This upgraded model provides impressive
2-ohm
output power capability while still maintain-
ing the current
4-
and &ohm ratings, and meets rigid industry standards for power bandwidth, slew rate, and
distortion specifications.
The new extended specs are:
525 W RMS into 4 ohms / 750 W RMS into 2 ohms (per channel)
1050 W RMS into 8 ohms
/
1500 W RMS into 4 ohms (bridged)
DDTTM
compression with LED indicators and defeat switch
Slew Rate: 40 V/microsecond, stereo mode, each channel
Power Bandwidth: 10 Hz to 50 kHz
@
4 ohms, rated power
Total Harmonic Distortion: less than
0.03%,
rated power
Hum and Noise: 100
dB
below rated power, unweighted
All the current features of the previous units have been retained, including Peavey’s patented
DDTTM
com-
pression system and the very flexible back-panel patching capabilities. The two-speed fan cooling system
has been improved to automatically provide additional cooling for the two-ohm load conditions.
FEATURES
.
.
.
.
.
.
.
.
.
l
.
.
.
Automatic two-speed fan cooling system/tunnel
Independent channel thermal/fault protection
Transient-free turn-on/off operation (relay)
Two “back-porch” crossover “island” sockets for plug-in modules
Two “back-porch” balanced-input transformer sockets for PL-2’s
Single XLR and dual phone plug inputs each channel
XLR input can be transformer-balanced
Dual phone plug and 5-way binding post outputs each channel
High temperature shutdown LED each channel
DDTTM
activation LED each channel
Ten-segment, tri-colored power level LED array each channel
Calibrated/detented input attenuator control each channel
Rear panel
DDT
TM
defeat and bridge mode select slide switches

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Peavey CS 1000X and is the answer not in the manual?

Peavey CS 1000X Specifications

General IconGeneral
BrandPeavey
ModelCS 1000X
CategoryAmplifier
LanguageEnglish

Related product manuals