EasyManuals Logo
Home>Peavey>Amplifier>CS 6000

Peavey CS 6000 User Manual

Peavey CS 6000
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
CS®6000/CS®4000 Specifications
CS 6000 CS 4000
Rated Power Bridge 4 Ohms @1kHz 0.15% THD 5800 Watts 3600 Watts
Rated Power Bridge 8 Ohms @1kHz 0.15% THD 4300 Watts 2800 Watts
Rated Power 2 Ohms @1kHz 0.15% THD Both channels driven 2900 Watts 1850 Watts
Rated Power 4 Ohms @1kHz 0.15% THD Both channels driven 2150 Watts 1400 Watts
Rated Power 8 Ohms @1kHz 0.15% THD Both channels driven 1375 Watts 920 Watts
Maximum Voltage Swing 128 Vrms 100 Vrms
Minimum Load Impedance 2 Ohms
Frequency Response (+0dB -1 dB @ 1 Watt) <10 Hz - 35 kHz
Voltage Gain x100 (+40 dB)
Low-Cut Filter -3 dB @ 40 Hz, 12 dB/Octave
Crossover High-Pass and Low-Pass Filters (Linkwitz-Riley Alignment) -6 dB @100 Hz, 24 dB/Octave
Crosstalk @ 1kHz-10kHz , 8 Ohms, 900 Watts <87 dB <70 dB
Hum and noise 20 Hz to 22 kHz < 95 dB <95 dB
Input Sensitivity +/-3% @ 1 kHz, 2 Ohms 0.79V (0 dBu) 0.75V (0 dBu)
Input Impedance Balanced 20 kOhms
Input Impedance unbalanced 10 kOhms
Current Draw @ 120 VAC, 1/8th power, 2 Ohm load 15.7A (1880VA) 10.3A (1236VA)
@ 120 VAC, 1/8th power, 4 Ohm load 12.8A (1535VA) 9.6A (1150VA)
@ 120 VAC, 1/8th power, 8 Ohm load 9.5A (1140VA) 6.8A (816VA)
@ 120 VAC, 1/3th power, 2 Ohm load 39.8A (4770VA) 27.0A (3240VA)
@ 120 VAC, 1/3th power, 4 Ohm load 27.6A (3310VA) 18.7A (2280VA)
@ 120 VAC, 1/3th power, 8 Ohm load 17.1A (2050VA) 11.9A (1475VA)
@ IDLE 1.8A (220VA) 1.50A (180VA)
Current Draw @ 240 VAC, 1/8th power, 2 Ohm load 7.8A (1880VA) 5.0A (1200VA)
@ 240 VAC, 1/8th power, 4 Ohm load 6.4A (1535VA) 4.91A (1180VA)
@ 240 VAC, 1/8th power, 8 Ohm load 4.8A (1140VA) 3.4A (812VA)
@ 240 VAC, 1/3th power, 2 Ohm load 19.9A (4770VA) 13A (3000VA)
@ 240 VAC, 1/3th power, 4 Ohm load 13.8A (3310VA) 9.2A (2170VA)
@ 240 VAC, 1/3th power, 8 Ohm load 8.6A (2050VA) 5.8A (1380VA)
@ IDLE 1.8A (220VA) 1.50A (180VA)
Cooling: 120mm Variable speed fan. Rear to front air flow
Controls Front: 2 input attenuators
Controls Rear: Bridge/Stereo Switch, DDT Defeat switch, 2 Crossover enable Switches, 2-High-
pass filter enable switches
Indicators: 2 Bicolor (red/green) LEDs of DDT/Signal indication; Power and Protect

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Peavey CS 6000 and is the answer not in the manual?

Peavey CS 6000 Specifications

General IconGeneral
BrandPeavey
ModelCS 6000
CategoryAmplifier
LanguageEnglish

Related product manuals