Peavey DPE 2P User Manual

DPE
™
2P-4P
Thank you for purchasing the class D powered Peavey
®
DPE
™
2P-4P. The DPE 2P-4P features a bi-amped power section that
provides 1200 watts of peak power for the woofer and 150 watts of peak power for the compression driver tweeter, both with Peavey
DDT
™
compression. Featuring a 15" Black Widow
®
woofer and the RX
™
22CT true compression driver, the DPE 2P-4P provides two
independent mixed input channels, each with Gain control and a mic/line gain switch. Each channel features a combo jack with
balanced input 1/4" TRS & female XLR and a level control.
Features
• Bi-amplified powered speaker system
• 1200 watts peak woofer power, both power amps have DDT compression
• Fan cooled
• 15" Black Widow
®
woofer
• Peavey RX
™
22CT compression driver tweeter on a Quadratic Throat Waveguide™
• DSP-controlled DynaQ
™
circuit provides tone shaping options, including automatic equal loudness contour
• Peak SPL up to 131 dB with music!
• Two independent mixed input channels, with Gain control and mic/line gain switch
• Each channel features a combo jack with 1/4" TRS & female XLR balanced input
• Channel 2 features an extra pair of RCA input jacks
• Output connectors include: XLR, TRS 1/4" jack connectors
• Steel handles on each side, DPE-4P has a handle on the top rear to use the built-in rear casters
• Perforated steel grille
• Rugged wooden enclosure
• Pole mount (for DPE-2P only)
• Reduced weight – DPE 2-P 67 lbs. /30.4 kg
DPE 4-P 103 lbs. /46.7 kg
DESCRIPTION
The Peavey DPE
™
2P-4P is a powered, bi-amplified, two-way speaker system engineered to provide very high levels of performance in
a compact powered loudspeaker. This two-way powered system is comprised of a 1200 W peak class D power amplifier driving a 15"
Black Widow
®
woofer. The RX
™
22CT true compression tweeter is driven by a 150 W peak dynamic power amplifier, and is coupled to
a Quadratic Throat Waveguide™ with a coverage pattern of 100˚ horizontal by 50˚ vertical.
The DPE 2P-4P is capable of up to 131 dB peak SPL. The enclosure utilizes plywood in a modified-trapezoidal form, with a coated
perforated steel grille to offer an attractive yet durable powered speaker system. The cabinet and grille are black.
Two independent mixed input channels each offer a level control and a balanced input to the preamp/EQ electronics. Each channel
has a combo female XLR and 1/4" TRS phone jack. It is switchable between mic-level and line-level sensitivity. Channel 2 has an
additional pair of RCA input jacks. A line out section has XLR, and TRS 1/4" phone jacks. These outputs allow line-level linking of
additional speaker systems, or recorder outputs, etc.
Extensive tone shaping is available via a DSP-controlled DynaQ
™
circuit which offers Bass Enhancement, Contour, and a Music or
Speech mode.
The Contour circuit is for accentuating bass and treble at low listening volume levels.
ENGLISH

Peavey DPE 2P Specifications

General

Brand	Peavey
Model	DPE 2P
Category	Speaker System
Language	English