09931295C
PerkinElmer, 710 Bridgeport Avenue,
Shelton, CT 06484-4794, U.S.A
Produced in the USA.
Lambda 265, 365 and 465 Manual Magnetic Stirrer
Assembly Installation Instructions
This instruction sheet describes the installation of this accessory which is used with the Lambda 265, 365
and 465 Spectrophotometer.
NOTE:
Read these instructions before you install this accessory.
Contacting PerkinElmer
Supplies, replacement parts, and accessories can be ordered directly from PerkinElmer, using the part
numbers.
See our website:
http://perkinelmer.com
PerkinElmer's catalog service offers a full selection of high-quality supplies.
To place an order for supplies and many replacement parts, request a free catalog, or ask for information:
If you are located within the U.S., call toll free 1-800-762-4000, 8 a.m. to 8 p.m. EST. Your order will be
shipped promptly, usually within 24 hours.
If you are located outside of the U.S., call your local PerkinElmer sales or service office.
Features
• Easy to install
• Single-hand operation by just turning the adjustment wheel
• Stirring bar rotating evenly at variable speed
• Vertical mixing
• Ideal for small to medium stirring volumes of low-viscosity liquids
• Only one channel stirring available
Figure 1 Magnetic Stirrer Control Unit [P/N: N4101015]
To Next Page
Need help?
General
