Region and Language Settings
Language
(Home) > Settings > Region and
language > Language
Change the language of the TV menu and messages
(Home) > Settings > Region and
language > Language > Menu language
Set audio preference language
(Home) > Settings > Region and
language > Language > Primary audio, Secondary
audio
Digital TV channels can broadcast audio with several
spoken languages for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV will
switch to this audio.
Set subtitle preference language
(Home) > Settings > Region and
language > Language > Primary subtitle, Secondary
subtitle
Digital channels can offer several subtitle languages for a
programme. You can set a preferred primary and
secondary subtitle language. If subtitles in one of these
languages are available, the TV will show the subtitles
you selected.
Set teletext preference language
(Home) > Settings > Region and
language > Language > Primary text, Secondary text
Some digital TV broadcasters have several Text
languages available.
Clock
(Home) > Settings > Region and language > Clock
Correct clock automatically
(Home) > Settings > Region and
language > Clock > Auto clock mode
• The standard setting for the TV clock is Automatic. The
time information comes from the broadcasted UTC -
Coordinated Universal Time information.
• If the clock is not correct, you can set the TV clock
to Country dependent.
• When select Country dependent, you can set the time
for Automatic, Standard time, or Daylight saving time.
Correct clock manually
(Home) > Settings > Region and
language > Clock > Auto clock mode > Manual
(Home) > Settings > Region and
language > Clock > Date, Time
Go to previous menu, and select Date and Time to adjust
the value.
Note:
• If none of the automatic settings display the time
correctly, you can set the time manually.
• The Auto clock mode setting will be back to Automatic
after the TV power is turned off and on again.
Set time zone or set a time offset for your region
(Home) > Settings > Region and
language > Clock > Time zone
Select one of the time zones.
Set the TV to switch to Standby automatically after a
preset time
(Home) > Settings > Region and
language > Clock > Sleep timer.
Set the TV to switch to Standby automatically after a
preset time. With the slider bar you can set the time to
up to 180 minutes in increments of 5 minutes. If set to 0
minutes, the sleep timer is switched off. You can always
switch off your TV earlier or reset the time during the
countdown.
42
To Next Page
Loading...
Need help?
General