Philips HQ-T 388 User Manual

PCS 101 335
DISASSEMBLY ADVICE
to replace SPRING ON/OFF
SWITCH (4)
to replace BATTERY (6)
PCB (7)
remove SCREW A
N.B. Never use again a deformed trimmer clamp (10).
Before reassembling the battery holder, make sure that the
internal wiring is guided.
After the product has been repaired, it should function properly
and has to meet the safety requirements as laid down and offi cially
established at this moment.
to replace ZOOM RING +
GUIDE PART (8)
SPRING ZOOM RING (9)
SPRING POP-UP
TRIMMER (11)
POP-UP TRIMMER (12)
remove COMB (1)
remove CUTTER (2)
remove TRIMMER CLAMP (10)
5 mm
0.5 mm
± 80 mm
Prepare a disassembly tool of a metal strip.
Insert the disassembly tool into the small
gap on the rear side of the product.
1
2
Turn and push the zoom ring as shown in
the picture.

Philips HQ-T 388 Specifications

General

Brand	Philips
Model	HQ-T 388
Category	Electric Shaver
Language	English