1 Display the “Route info” screen.
= For details, refer to Displaying the “Route
info” screen on page 44.
2 Touch [Waypoints].
The “Waypoints List” screen appears.
3 Touch [Sort].
The “Sort Waypoints” screen appears.
4 Touch the waypoint or destination.
Put them in the desired order.
# Touch [Automatic].
You can sort the destination and waypoints auto-
matically. The system will show the nearest way-
point (distance in a straight line) from the current
location as waypoint 1, and sort the other points
(including your destination) in order of distance
from the waypoint 1.
# Touch [Clear].
Waypoint sort is cancelled.
5 Touch [OK].
The “Waypoints List” screen appears.
6 Touch [OK] on the “Waypoints List”
screen.
The route is recalculated, and the Route con-
firmation screen appears.
7 Touch [OK].
The map of the current position appears.
Cancelling the route guidance
If you no longer need to travel to your destina-
tion, follow the steps below to cancel the route
guidance.
1 Touch [Home] on the map screen and
then touch [Navigation].
= For details of the operations, refer to Screen
switching overview on page 22.
2 Touch [Cancel].
A message confirming the cancellation of the
current route appears.
3 Touch [Yes].
The current route is deleted, and a map of
your surroundings reappears.
# Touch [Skip].
The next waypoint along the route is skipped.
A new route to your destination through all re-
maining waypoints, except for the skipped way-
point, is calculated.
When the route calculation is completed, Route
confirmation screen appears.
p [Skip] is available only when a waypoint is
set.
# Touch [No].
The previous screen returns without deleting the
route.
Engb
47
Chapter
09
Checking and modifying the current route
Checking and modifying the current route
To Next Page
Loading...
Need help?
General
Weight and Dimensions
