System Firmware Update Instructions For BDP-LX70A
NOTES:
If you have any difficulty carrying out these instructions, please first refer to the System
Firmware Update FAQ included in this document and/or contact Pioneer Customer Support
Center.
A. Check the current firmware version of the player:
Using the player’s remote control:
1. Press the "STANDBY/ON" button to switch the unit on.
2. If the player starts to play a disc, press the "STOP" button and wait until the Pioneer logo is
displayed on your TV.
3. Press the "HOME MENU" button.
4. Select "Initial Setup" next press "ENTER"
5. Select "Video Out" next press "ENTER"
6. Select "TV Aspect Ratio" next press "ENTER"
7. Press the "BLUE" button on the remote control
8. The firmware version of your player will be displayed in the bottom right portion of the TV screen.
If the version number is 3.81 or higher, it is not necessary to update the firmware.
If the version number is less than 3.81, it is necessary to update the firmware.
B. Download the firmware ZIP file from Pioneer's website:
Download the firmware ZIP file named "BDP18A_V381.zip" from the website to a folder on your
computer.
C. Create the firmware update disc:
NOTE: Use a brand new CD-R/-RW disc to burn the firmware update. The player may not
be able to correctly read a dirty disc or a disc with scratches.
Items needed to create the firmware update disc:
A CD-R/-RW drive
CD-R/-RW creation (writing) software
One blank CD-R or CD-RW disc
CD-R Disc: You can only use a blank CD-R disc
CD-RW Disc: You can only use a blank CD-RW disc. If the disc has been used, the contents
must be erased before copying the firmware files to it
To Next Page
Need help?
General
