EasyManuals Logo
Home>Pioneer>Blu-ray Player>BDP-LX91

Pioneer BDP-LX91 Update Instructions

Pioneer BDP-LX91
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
REMARKS:
No other OS is supported.
Certain conditions or PC settings may prevent you from being able to correctly create the
update disc.
For information about burning or adding files to a CD-R/-RW, refer to the instruction manual
for your disc creation software, or ask the manufacturer of the disc creation software or
manufacturer of the PC for further assistance.
PROCEDURE:
1. Place a CD-R or CD-RW disc in the drive.
2. Double click the ZIP file named "BDP25A_V273.zip" to open it.
3. Double click the zipped ISO file named "BDP25A_V273.iso".
The CD creation writing software on your computer should automatically open. After the
software opens, it should already be set to burn an image file. If not, please make this the
setting in your software. If your software does not open automatically, then please go to step
4, otherwise skip to step 5.
4. If your software does not open automatically, then extract and save the zipped file named
"BDP25A_V273.iso" to a folder on your computer. Open your creation writing software, and
set it to burn an image file.
5. Make sure the ISO file "BDP25A_V273.iso" is selected as the source file then copy/burn the
file to the disc.
D. After the disc is completed, confirm the following 3 files are on the disc:
NOTE:
- If the correct files are not copied to the disc, your player will not recognize it as an update disc and
you will not be able to carry out the update.
DLfile.pkg 97.8Mbyte (102,563,920 bytes)
DLdiscidentifier.txt 94 bytes
.DLdiscidentifier.txt 94 bytes
- Confirm the file named “DLfile.pkg” is the correct size. You can check the file size by selecting the
file then press the right mouse button and choosing "Properties". If the file name and size do not
match the ones listed above, then perform steps B and C again using a new blank disc.
E. Update the player’s system firmware:
REMARKS:
Use the front panel buttons to carry out all actions. DO NOT use the remote control buttons.
The update process can take anywhere from 15 to 25
minutes.
The disc tray will open at the end of update process, so if you have your player in an enclosed

Other manuals for Pioneer BDP-LX91

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pioneer BDP-LX91 and is the answer not in the manual?

Pioneer BDP-LX91 Specifications

General IconGeneral
HDMIYes
Weight14300 g
Audio systemDolby Digital Plus, Dolby TrueHD, DTS, DTS-HD
Playback formatsAVCHD, DivX
Dimensions (WxDxH)420 x 365 x 143 mm
Power requirementsAC 220-240 V, 50/60 Hz
Disc types supportedBD-ROM, CD, DVD-R DL
Audio formats supportedAAC, MP3, WMA
Image formats supportedJPG
Power consumption (standby)0.3 W
Power consumption (typical)59 W
Component video (YPbPr/YCbCr) out1
Audio output channels7.1 channels
Networking featuresEthernet

Related product manuals