Need help?Do you have a question about the Pioneer VSX-409RDS and is the answer not in the manual?
Power| continuous power output | 80 W + 80 W (DIN, 1kHz, 0.9 %, 8 Ω) |
|---|---|
| power supply voltage | 230 V |
| power requirements | AC 220-230 V, 50/60 Hz |
| power consumption | 220 W |
| standby power consumption | 1 W |
Audio Specifications| input sensitivity/impedance | 200 mV/47 kΩ |
|---|---|
| frequency response | 5 Hz to 100, 000 Hz |
| output level/impedance | 200 mV/2.2 kΩ |
| tone control bass | ± 6 dB (100 Hz) |
| tone control treble | ± 6 dB (10 kHz) |
| s.bass | + 8 dB (100 Hz) |
| signal-to-noise ratio | 88 dB/64 dB |
Video Section| video input sensitivity/impedance | 1 Vp-p/75 Ω |
|---|---|
| video output level/impedance | 1 Vp-p/75 Ω |
| video frequency response | 5 Hz to 7 MHz –3 dB |
| video signal-to-noise ratio | 55 dB |
| video cross talk | 55 dB |
FM Tuner Section| fm frequency range | 87.5 MHz to 108 MHz |
|---|---|
| fm usable sensitivity | Mono:15.2 dBf, IHF (1.6 µV/75 Ω) |
| fm 50 dB quieting sensitivity | Mono: 20.2 dBf |
| fm signal-to-noise ratio | Mono: 76 dB (at 85 dBf) |
| fm distortion | Stereo: 0.6 % (1 kHz) |
| fm alternate channel selectivity | 70 dB (400 kHz) |
| fm stereo separation | 40 dB (1 kHz) |
| fm frequency response | 30 Hz to 15 kHz (±1) dB |
| fm antenna input | 75 Ω unbalanced |
| fm sensitivity (DIN) | Mono: 1.1 uV(S/N 26dB) |
| fm signal-to-noise ratio (DIN) | Mono: 62dB |
AM Tuner Section| am frequency range | 531 kHz to 1, 602 kHz |
|---|---|
| am sensitivity (IHF, Loop antenna) | 350 µV/m |
| am selectivity | 30 dB |
| am signal-to-noise ratio | 50 dB |
| am antenna | Loop antenna |
Weight and Dimensions| dimensions | 420 (W) x 158 (H) x 391 (D) mm |
|---|---|
| weight | 8.4 kg |
To Next Page
