To Next PageTo Next PageTo Previous PageTo Previous Page
Why does my Polaris Snowmobiles engine lack power?
If your Polaris Snowmobile engine lacks power, several factors could be at play. Start by replacing fouled or defective spark plugs. If the issue persists, check the fuel filter flow; it should be steady and encompass the entire diameter of the fuel line when disconnected. If not, replace the filter.
What to do if my Polaris Snowmobiles engine turns but fails to start?
If your Polaris Snowmobiles engine turns but fails to start, there are several things to check. First, install new spark plugs. If that doesn't work, ensure the fuel valve is on and the fuel tank contains fuel. Try using the choke. If ice may be in the fuel line, filter, or pump, add isopropyl alcohol to the fuel system. If the engine is flooded, hold the throttle open and crank the engine several times. Note that on the standard Polaris carburetor, the choke will not function with the throttle depressed.
How to troubleshoot noise in the drive system of Polaris 550 IQ Shift?
If you notice noise in the drive system of your Polaris Snowmobiles, inspect the drive belt for flat spots and replace it if needed. Also, check the drive chain for looseness and adjust or replace it as necessary.
What causes a Polaris 550 IQ Shift engine to continually backfire?
If your Polaris Snowmobiles engine continually backfires, start by changing the spark plugs. Additionally, check the fuel system for dirt or ice; if present, add deicer to non-ethanol fuel.
Why is the drive clutch engagement harsh on my Polaris 550 IQ Shift?
A harsh drive clutch engagement in your Polaris Snowmobiles can be due to a worn or too narrow drive belt. Replacing the drive belt may resolve this issue.
How to improve poor low RPM performance on Polaris 550 IQ Shift Snowmobiles?
Poor low RPM performance in your Polaris Snowmobiles can stem from several causes. Begin by inspecting the drive belt for wear and replace it if necessary. Then, check the torque stop for looseness and adjust it accordingly.
What causes the drive belt to turn over on Polaris 550 IQ Shift Snowmobiles?
If the drive belt turns over on your Polaris Snowmobiles, it might be the wrong belt for the application. Replacing the drive belt with the correct one may solve the problem.
Why does my Polaris 550 IQ Shift Snowmobiles engine require more pulls to start than usual?
If your Polaris Snowmobiles engine requires more than normal pulls to start, it could be due to poor fuel quality. Try replacing the fuel with fresh winter fuel.
General| Displacement | 544 cc |
|---|---|
| Front Suspension | IQ |
| Rear Suspension | IQ |
| Cylinders | 2 |
| Cooling | Liquid |
| Track Length | 121 in |
| Track Width | 15 in |
| Front Travel | 9 in (22.9 cm) |
| Rear Travel | 13.9 in |
| Ski Type | Gripper |
| Ski Stance | 42.5 in (108 cm) |
