97
MAINTENANCE
Clutch System
Drive Belt
Belt width and length must match the center distance of the clutches and
sheave width of the drive clutch. Polaris recommends the use of O.E.M.
belts. Other belts may match the dimensions, but can drastically change
the shift pattern, resulting in poor performance. See Drive Belt Trouble-
shooting on page 119.
Periodically check the condition and tension of the drive belt. Inspect
the belt for signs of excessive wear: frayed edges, missing cogs, cracks
and excessive looseness. Replace the belt if any of these conditions
exist. A worn belt will continue to function, but will not deliver maxi-
mum performance.
Always carry a spare drive
belt for emergency use. Store
the spare belt in the belt and
tool storage area which is
located on the clutch cover.
For improved drive-away
during extremely cold tem-
peratures, remove the belt and
warm it to room temperature.
Reinstall it before starting the
snowmobile.
To Next Page
Loading...
Need help?
General
