110
Maintenance
Engine Cooling System
Radiator Coolant Level
If the recovery bottle has run dry, inspect the level in
the radiator and add coolant if necessary. The radiator
pressure cap is located on the left side of the vehicle.
CAUTION! Escaping steam can cause burns. Never
remove the pressure cap while the engine is warm or hot.
Always allow the engine to cool before removing the
pressure cap.
1. Remove the pressure cap.
2. Using a funnel, slowly add coolant as necessary
through the radiator filler neck.
3. Reinstall the pressure cap. Use of a non-standard
pressure cap will not allow the recovery system to function properly. Contact your dealer
for the correct replacement part.
To Next Page
Loading...
Need help?
General
