89
Starting the Engine
6. Push the engine stop switch up to the ON position.
7. Turn the ignition key to ON.
NOTE: Do not press the throttle while starting the engine.
8. Squeeze the rear brake lever and press the start button. The rear brake lever must be
engaged for the engine to start.
9. Activate the starter for a maximum of five seconds, releasing the button when the engine
starts. If it doesn't start, release the starter, wait five seconds, then activate for another
five seconds. Repeat until the engine starts.
10. If the engine slows or stops, position the choke lever half way to allow proper engine
warm up. Vary the RPM slightly with the throttle to aid in warm up.
11. When the engine idles smoothly, push the choke lever completely to the right.
To Next Page
Loading...
Need help?
General
