TRANSMISSION OIL CHANGE
The drain plug is located on the bottom of the gearcase. Access the drain plug
through the hole in the skid plate.
1. Remove the fill plug
q
.
2. Place a drain pan under the drain
plug
w
.
3. Remove the drain plug. Allow the
fluid to drain completely.
4. Clean and reinstall the drain plug.
Torque to specification.
5. Add the recommended fluid to the
bottom of the fill plug hole. Do not
overfill.
6. Reinstall the fill plug. Torque to
specification.
7. Check for leaks. Discard used fluid
properly.
109
MAINTENANCE
Downloaded from ManualsNet.com search engine