Polaris RANGER 2019 User Manual

POSITION BULB AND INDICATOR BULB REPLACEMENT
1. Remove the hood from the front cab.
2. Locate the bulb on the back side of the headlight housing.
3. Disconnect the harness from the bulb. Be sure to pull on the connector, not
on the wiring.
4. Turn the bulb counterclockwise and remove it from the headlight housing.
5. Install the new bulb into the housing and rotate it clockwise 90° to lock it in
place.
NOTE
Make sure the tab on the bulb locates properly in the housing.
6. Install the harness onto the new headlight bulb and install the hood.
HIGH/LOW BULB REPLACEMENT
1. Remove the hood from the front cab.
2. Locate the High/Low bulb on the back side of the headlight housing.
3. Disconnect the harness from the bulb. Be sure to pull on the connector, not
on the wiring.
137
MAINTENANCE
Downloaded from ManualsNet.com search engine

Polaris RANGER 2019 Specifications

General

Brand	Polaris
Model	RANGER 2019
Category	Offroad Vehicle
Language	English