SEAT BELTS
This vehicle is equipped with three-point lap and diagonal seat belts for the
operator and passengers. Always make sure the seat belts are secured for all
riders before operating.
WARNING
Falling from a moving vehicle could result in serious injury or death. Always
fasten your seat belt securely before operating or riding in the vehicle.
To wear the seat belt properly, follow this procedure:
1. For 3-point belts, pull the seat belt latch
q
downward and across your chest
toward the buckle at the inner edge of the seat. The belt should fit snugly
across your hips and diagonally across your chest. Make sure the belt is not
twisted.
2. Push the latch plate
q
into the buckle
w
until it clicks.
3. Release the strap, it will self tighten.
4. To release the seat belt, press the square red button in the buckle’s center.
36
FEATURES AND CONTROLS
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
