HELMET AWARE
The helmet aware beacon and
mounting adhesive comes shipped with
the owner’s manual. This allows
parents to mount to the Polaris supplied
helmet or helmet of their choice. The
helmet aware beacon should be
mounted on a flat surface on the
helmet.
The display will issue a low battery
message if the beacon is below 10%
battery level. Parents can replace the
battery beacon with a CR2032.
To replace the battery remove 2 screws
from the enclosure and then split the
beacon apart with a small standard
screw driver.
Helmet aware comes disabled from
factory and must be enabled by parent.
43
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
