Polaris Sportsman 550 EFI User Manual

Explains safety alert symbols, WARNING, CAUTION, NOTICE, and prohibition/mandatory signs.

Emphasizes the hazards of improper operation and the need for training and age compliance.

Guides on recording VIN, engine serial number, and key number.

Encourages ATV safety training and provides contact information for resources.

Details essential protective clothing and gear for safe ATV operation.

Warns against modifications that increase speed/power and advises using approved accessories.

Summarizes key safety warnings, including age restrictions and operation hazards.

Warns against operating under the influence of alcohol or drugs.

Prohibits operation on public streets, roads, and highways.

Details risks of improper hill climbing and correct procedures.

Prohibits operation by individuals under 16 years of age.

Warns about loss of control from improper tire pressure or overloading.

Identifies and describes various switches like Headlight, Mode/Reverse Override, and Engine Stop.

Explains the operation of the throttle lever and Polaris Electronic Throttle Control (ETC).

Describes the hydraulic disc brake lever and checks for proper operation.

Explains how the AWD system is controlled by the 4X4 switch.

Describes the instrument cluster and rider information center.

Explains the importance of the break-in period for new engines and drive components.

Lists items to check before each ride to ensure safe operating condition.

Lists essential practices for safe ATV operation, including training and hazard avoidance.

Provides step-by-step instructions for starting the ATV engine.

Details precautions and procedures for safely carrying a passenger.

Advises on safe procedures for operating the ATV on hills.

Provides precautions for safe downhill operation.

Details precautions for overloading, weight distribution, and securing loads.

Advises against modifying components that affect noise compliance.

Describes the closed crankcase system for managing blow-by gases.

Explains how exhaust emissions are controlled by engine design and EFI.

Introduces the chart for regular vehicle inspection and service intervals.

Details recommended lubricants, capacities, and torques for various components.

Covers engine oil recommendations, level checks, and oil/filter changes.

Recommends transmission fluid and outlines oil check and change procedures.

Provides instructions for checking and changing rear gearcase oil.

Explains the cooling system operation and coolant recommendations.

Details hand brake operation, checks, and auxiliary foot brake system.

Covers tire tread depth, wheel hub tightening, and wheel removal/installation.

Provides instructions for removing, cleaning, and reinstalling the air filter.

Explains how to replace a blown fuse and locate the fuse box.

Discusses headlight/taillight maintenance, replacement, and adjustment.

Covers spark plug recommendations and inspection procedures.

Provides steps for inspecting and drying the vehicle after immersion in water.

Warns against modifying the PVT system and outlines owner responsibilities.

Contains warnings regarding battery handling, electrolyte, and explosive gases.

Lists possible causes and solutions for drive belt wear or burning.

Lists possible causes and solutions when the engine won't turn over.

Lists possible causes and solutions for irregular engine running.

Lists possible causes and solutions for engine overheating.

Outlines the limited warranty terms for vehicle components against defects.

Explains the warranty registration process and its importance for coverage.

Details what is excluded from the warranty coverage, such as wear and tear.

Guides on how to get warranty service from authorized Polaris dealers.