EasyManuals Logo
Home>Polaris>Swimming Pool Cleaners>W 432

Polaris W 432 User Manual

Polaris W 432
147 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
3
WARNINGS ASSOCIATED WITH ELECTRICAL APPLIANCES
The power supply to the appliance must be protected by a dedicated 30 mA Residual
Current Device (RCD), complying with the standards and regulaons in force in the
country in which it is installed.
Do not use any extension lead when connecng the appliance; connect the appliance
directly to a suitable power supply.
Before carrying out any operaons, check that:
- The required input voltage indicated on the appliance informaon plate corresponds
to the mains voltage;
- The mains supply is compable with the appliance's electricity needs and is correctly
grounded.
In the event of abnormal operaon or the release of odours from the appliance,
turn it o immediately, unplug it from its power supply and contact a professional.
Before servicing or performing maintenance on the appliance, check that it is
powered o and completely disconnected from the power supply and that all other
equipment or accessories connected to the appliance are also disconnected from
the power circuit.
Do not disconnect and reconnect the appliance to the power supply when in
operaon.
Do not pull on the power cord to disconnect it from the power supply.
If the power cord is damaged, it must be replaced by the manufacturer, an authorised
representave or a repair facility only.
Do not perform maintenance or servicing operaons on the appliance with wet
hands or if the appliance is wet.
Before connecng the appliance to the power supply, check that the connecon
unit or socket to which the appliance will be connected is in good condion and
shows no signs of damage or rust.
In stormy weather, disconnect the appliance from the power supply to prevent it
from suering lightning damage.
Do not immerse the appliance in water (with the excepon of cleaners) or mud.
SPECIFIC FEATURES APPLICABLE TO "Pool cleaners"
To avoid possible injury or damage to the cleaner, do not operate the cleaner out of
the water.
In order to prevent possible injury, bathing is prohibited when your cleaner is in the
pool.
Do not use the cleaner during shock chlorinaon.
Do not leave the cleaner unaended for an extended period.
WARNING ON THE USE OF A CLEANER IN A POOL WITH A LINER:
Before installing the cleaner, carefully inspect the pool lining. If the liner is damaged
in some places, do not install the cleaner before having the liner repaired or replaced
by a qualied professional. The manufacturer may not be held liable in any way for
damage caused to the liner.
The surface of certain paerned liners can wear away quickly: the paerns and/
or colours can become deteriorated, faded or disappear on contact with certain
objects. The cleaner manufacturer may not be held liable for wear to the liners or
faded paerns, which are not covered by the limited warranty.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris W 432 and is the answer not in the manual?

Polaris W 432 Specifications

General IconGeneral
BrandPolaris
ModelW 432
CategorySwimming Pool Cleaners
LanguageEnglish

Related product manuals