The Playback Mode allows you to review and edit photos and videos that you’ve already taken
with your camera.
When you first turn on the camera, the camera will be in Photo Capture mode by default.
Press the MODE button twice to open the Playback Mode.
The latest captured image appears on the LCD screen. If there are no images stored, a
message (No File) appears.
1) Selecting Your Photo:
Once in Playback Mode, press the LEFT or RIGHT button to scroll through the images on
your camera’s memory card until you find the image you would like to view.
- Press the LEFT button to display the previous image.
- Press the RIGHT button to display the next image.
Each captured image (video and photo) is displayed on the LCD screen.
Photos appear with a ‘JPG’ icon on the top left of the LCD screen.
2) Zooming In/Out of Your Selected Photo:
Press the T / Zoom In button to Zoom In and magnify the selected photo.
Use the UP / DOWN / LEFT / RIGHT buttons to navigate around the photo.
Press the W/Zoom Out button to Zoom Out of the selected photo.
Use the UP / DOWN / LEFT / RIGHT buttons to navigate around the photo.
Note: The Zoom Indicator moves up as you Zoom In and moves down as you Zoom Out.
The zoom magnification (up to X4) is shown below the Zoom Indicator.
Easily navigate and select the image you wish to view by using the Thumbnail View.
The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction
buttons to scroll and select images from the thumbnails.
To Next Page
Loading...
Need help?
General
