Poly Edge B30 Quick Tips

For more information about setting up and using the system, refer to the Support pages at support.poly.com
Poly Edge B Series IP Phones - Quick Tips PVOS Lite | 3725-49819-001A |1.0.0 | January 2023
These Quick Tips apply to Poly Edge B10, B20, and B30 IP phones.
Home
Screen
Press Home
to access the
Home screen.
Calls
Screen
Displays one or
more active calls
on your phone.
Contacts
Screen
Manage and
access contacts.
Switch among Phone Screens
You can view any screen on your phone from other
screens.
To switch between screens:
» Press Home to view the Main Menu,
Lines, or Calls screen.
Place Calls
You can only have one active call in progress on
your phone.
To place a call:
» Do one of the following:
 Lift the handset from the cradle, enter the
number, and press the Dial softkey.
 Enter a number using the dialpad, then
press the speakerphone button.
 Enter a number using the dialpad, then
press the headset button.
Place a call from the phone book:
1 Press Home .
2 Go to Contacts.
3 Select a contact.
4 Press the Call softkey.
Answer Calls
You can answer calls using the handset,
speakerphone, or a headset.
To answer a call:
» Do one of the following:
 Pick up the handset.
 Press the speakerphone button.
 Press the headset button.
 Press the line key to which the incoming call
is assigned.
 Press the Answer softkey.
End Calls
You can end active or held calls.
To end a call:
1 On the Calls screen, highlight the call.
2 Press the End softkey.
Hold and Resume Calls
You can have multiple calls on hold and resume a
call at any time.
To hold a call:
» Do one of the following:
 Press the Hold softkey. This holds only the
highlighted call on the screen.
 Press the Hold feature key. This holds all
calls that are in a holdable state.
To resume a call
» Do one of the following:
 Press the Resume softkey. This resumes
only the highlighted call on the screen.
 Press the call key that hosts the call to
resume. This resumes the call only if it is in
the holding state.
Transfer Calls
You can transfer calls to any contact.
To transfer a call:
1 Select a highlighted entry on the Calls screen.
2 Do one of the following:
 Press the Trnsfr softkey.
 Press the B.Trn.. softkey (if configured).
Forward Calls
You can forward an incoming call to a contact or
forward all incoming calls to a contact.

Poly Edge B30 Specifications

General

Brand	Poly
Model	Edge B30
Category	IP Phone
Language	English